National Datacomm Corporation 0630S02 ユーザーズマニュアル
22
Instant
Wave High Speed
PCI/PC Card
2. Make sure that the AP is powered on and working
3. Use Network Watcher to find and join with the AP
3. Use Network Watcher to find and join with the AP
Radio signal quality indicates Yellow or Red whilst in Infrastructure mode
•
The connected AP is too far away
1. Use Network Watcher to find an AP with a stronger signal
2.
Move your PC closer to the connected AP
•
The adapter antenna is not connected, or its signal path is blocked by metal
casing, e.g. metal filing cabinets
casing, e.g. metal filing cabinets
1. Make sure the antenna is firmly screwed in
2.
Arrange the antenna position to get the best radio signal
quality
quality
Transmission or reception throughput is low during network file accessing
•
Many stations are connected to the same group and heavily utilizing the
network
network
1. On an Infrastructure wireless network, use Network
Watcher to find, and connect to, a different AP with only a
few PC connections
few PC connections
2. In an Ad-Hoc environment, form your own wireless group
with a different wireless domain name to start a different
channel hopping pattern
channel hopping pattern
Ad-Hoc stations can't join each other
•
Two stations started at the same time
Reboot one station
•
Different Domain Name (ESSID)
Change the ESSID, using the InstantWave utility program, to
match that of the other stations on the Ad-hoc network
OR
Go to
match that of the other stations on the Ad-hoc network
OR
Go to
Control Panel/Network/InstantWaveAdapter
/Properties/Advanced/ESSID, and change it there