National Datacomm Corporation 0650S02 ユーザーズマニュアル
28 InstantWave High Speed
Access Point For Small Business
Figure 20. AP Properties
Here you may modify the IP address and Community strings in the Host Table.
Changes made here will be immediately effective.
Changes made here will be immediately effective.
If the connection attempt was unsuccessful, a message box will appear informing
you that the request has no response. Click OK to close the message box and
return to the main screen. Go through the procedure again to retry. If you cannot
connect to the AP by the third attempt, check that the AP information has been
correctly entered in the Host Table and that the Access Point (AP) is functioning.
If you are still experiencing problems, turn to Troubleshooting, on page 37.
you that the request has no response. Click OK to close the message box and
return to the main screen. Go through the procedure again to retry. If you cannot
connect to the AP by the third attempt, check that the AP information has been
correctly entered in the Host Table and that the Access Point (AP) is functioning.
If you are still experiencing problems, turn to Troubleshooting, on page 37.
Managing InstantWave High Speed Configurations
Config
If the AP selection is successful, the Config and View main menu items will be
enabled. Click the Config main menu item (or right-click on the AP name in the
APMS window) to open a sub-menu.
enabled. Click the Config main menu item (or right-click on the AP name in the
APMS window) to open a sub-menu.
Figure 21. Config/AP Setting