National Datacomm Corporation 9210S01 ユーザーズマニュアル

 

 

 

22 

This value determines the basic rates used and 
reported by the outdoor bridge. The highest rate 
specified is the rate that the outdoor bridge will use 
when transmitting broadcast/multicast and 
management frames. Available options are: 

•  1, 2 Mbps 
•  All (1, 2, 5.5, and 11) Mbps 
 

You can change the channel number from here. 
Wireless outdoor bridges that will be in 
communication with each other must be set to use 
the same channel in order to be able to establish a 
wireless link or links. 

Identifies the country where the outdoor bridge is 
used. Each country has defined its available channel 
numbers and transmission power  

Important: 

In a multiple cell network topology, overlapping and/or adjacent cells using different 
channels can operate simultaneously without interference if the difference between 
the center frequencies is at least 30 MHz. For example, channels 1, 7, and 13 are 
non-overlapping frequency channels.