Garmin International Inc 01113 ユーザーズマニュアル
Tracking System Owner’s Manual - Draft
G
ettInG
S
tarted
>
Using the Receiver
This section explains how to enter and select
information with the Receiver.
information with the Receiver.
Understanding Terms
As you progress through this owner’s manual, you are
directed to press a specific key or highlight a field on
the screen. When you are directed to press a key, you
should press and quickly release the key. A key may
need to be held down for a period of time to start a
secondary function, when the instructions tell you to,
the screen. When you are directed to press a key, you
should press and quickly release the key. A key may
need to be held down for a period of time to start a
secondary function, when the instructions tell you to,
do so. When a field is highlighted on the screen, it is
highlighted in yellow. The position of the highlight is
controlled by the ROCKER.
highlighted in yellow. The position of the highlight is
controlled by the ROCKER.
The following terms are used throughout this manual:
Highlight—move the highlighted area on the screen
up, down, left, or right with the ROCKER to select
up, down, left, or right with the ROCKER to select
individual fields.
Field—the location on a page where data or an
option can be shown and entered. Select (highlight)
option can be shown and entered. Select (highlight)
a field using the ROCKER to begin entering data or
selecting options.
selecting options.
On-screen button—use the ROCKER to highlight a
button, and press ENTER to select the button.
button, and press ENTER to select the button.
Scroll bar—when viewing a list of items too long to
appear on the screen, a scroll bar appears along the
right side of the list. To scroll through a list, press up
or down on the ROCKER or use Zoom In to scroll a
set of items and Zoom Out to scroll the entire screen.
appear on the screen, a scroll bar appears along the
right side of the list. To scroll through a list, press up
or down on the ROCKER or use Zoom In to scroll a
set of items and Zoom Out to scroll the entire screen.
Default—the factory setting saved in the unit’s
memory. You can change the settings, but you can
also revert to the factory (default) settings when you
select Restore Defaults when offered as an option.
memory. You can change the settings, but you can
also revert to the factory (default) settings when you
select Restore Defaults when offered as an option.
Highlighted
field
On-screen buttons
Field
Tracking System Owner's Manual F7 7
1/16/2007 1:51:42 PM