Garmin International Inc 01113 ユーザーズマニュアル
Tracking System Owner’s Manual - Draft
B
aSIc
o
peratIon
>
The Tracker Page
The Tracker Page provides distance and direction
information for each transmitter being tracked. Up
to three transmitters can be displayed on the Tracker
page at one time with a compass indicating the
direction of each and a scrollable list indicating the
distance from the receiver.
information for each transmitter being tracked. Up
to three transmitters can be displayed on the Tracker
page at one time with a compass indicating the
direction of each and a scrollable list indicating the
distance from the receiver.
The first time you use the Receiver and Transmitter
together you must setup the Tracker Page. The
Tracking System uses a low-power, 2.4 GHz,
wireless link for short range (approx. 20 feet)
two-way communication to set Transmitter identity
together you must setup the Tracker Page. The
Tracking System uses a low-power, 2.4 GHz,
wireless link for short range (approx. 20 feet)
two-way communication to set Transmitter identity
configuration. It uses radio one-way communication
allowing the Transmitter to report GPS position data
to the Receiver. You can track up to ten different
transmitters using one Receiver.
allowing the Transmitter to report GPS position data
to the Receiver. You can track up to ten different
transmitters using one Receiver.
Touching the Receiver to the Transmitter ensures a
clear path of wireless communication and allows the
Receiver to communicate with the Transmitter.
clear path of wireless communication and allows the
Receiver to communicate with the Transmitter.
Once recognized by the Receiver, the Transmitter is
placed on the Transmitter List where it can be viewed
on an Info page where it can be renamed and data
placed on the Transmitter List where it can be viewed
on an Info page where it can be renamed and data
about its current state, distance, distance traveled,
and average speed can be viewed. Update rates
for position reporting can be set, battery capacity,
communication and GPS signal strength can also be
viewed.
and average speed can be viewed. Update rates
for position reporting can be set, battery capacity,
communication and GPS signal strength can also be
viewed.
Each additional transmitter added to the Transmitter
list must be synched to the receiver and given a
list must be synched to the receiver and given a
specific identity to avoid conflicts in position and data
reporting.
reporting.
Tracking System Owner's Manual F13 13
1/16/2007 1:51:43 PM