Garmin International Inc 01113 ユーザーズマニュアル

M

aIn

 p

aGeS

 > 

 

1.  Press and hold the PAGE key to turn the 

electronic compass on or off. The Compass 

Icon 

 

appears in the status bar when the 

electronic compass is on. When you are not 

using the electronic compass, turn it off to 

conserve batteries. When it is turned off, the 

unit uses the GPS receiver for navigation.

2.  Hold the Receiver level to get an accurate 

electronic compass reading. You can obtain 

the most accurate reading if it is calibrated. 

(See the following page for calibration 

instructions.)

When you first use the Receiver or after you install 
new batteries, you have to calibrate the electronic 
compass outdoors. The accuracy of the electronic 
compass is adversely affected if the unit is not held 
level or you are near objects that generate magnetic 

fields, such as cars or buildings. 

Use the options menu to customize the Compass 
Page. With the Compass Page open, press MENU. To 
select an option, highlight it, and press ENTER.

The following options are available:

•  Sight ‘N Go—allows you to navigate to an 

object within your sight by pointing the unit at it.

•  Stop or Resume Navigation—turns active 

navigation for a route or a Go To on or off.

•  Recalculate— recalculates the path to a 

destination.

•  Course or Bearing Pointer—toggles between 

the course pointer and the bearing pointer.

•  Data Fields—allows you to select the number 

of data fields that appear on the Compass Page.

•  Change Data Fields—allows you to select the 

type of data you want to show in the data fields. 

See page 93 for definitions of each option.

•  Calibrate Compass—accesses the Compass 

Calibration Page for calibrating the compass.

•  Restore Defaults—returns to the factory settings.

Tracking System Owner's Manual F27   27

1/16/2007   1:51:45 PM