MilDef Crete Inc. DK886EX ユーザーズマニュアル
Getting Started
2
Quick Check
- Insert the battery into compartment; fix the screw till battery is in position.
- Attach the AC adapter and charge battery for at least 10 minutes.
Turn ON the computer by pressing the power button momentarily.
Notice:
- When ambient temperature is under 0℃, the system may not boot up
- Attach the AC adapter and charge battery for at least 10 minutes.
Turn ON the computer by pressing the power button momentarily.
Notice:
- When ambient temperature is under 0℃, the system may not boot up
immediately.
System will beep with charge light flashing while heater
working. After 13~15 minutes, the system will boot up automatically
- Under emergency situation, to skip heating and boot up system immediately
by pressing power button for >10 seconds. (But can not guarantee all devices
on the computer work properly)
on the computer work properly)
- Turn OFF the computer using either one of the following procedures:
1. Press power button momentarily to “Standby”* or “Hibernate”*
dependent on operating system (OS) and power scheme settings.
2. Press power button for 4 seconds to have a “Hard” power off.
System shuts down without saving any data or parameters.
*: Some operating systems may not support these functions.
3. Click Start
→ Shut Down in Windows to Turn OFF.
Driver or application software installation may be necessary for further operation.