MilDef Crete Inc. DR886EX ユーザーズマニュアル
Components and Operations
12
Replacing Modules
Caution! Turn OFF the power before replacing any module.
To remove the modules:
1. Turn OFF the computer. (“Hibernate” or “suspend to disk” are not
recommended as the parameters may change when modules are changed.)
2. Disconnect all cables from the computer.
3. Use a coin to turn loose the screws on the modules.
4. Remove the battery from the compartment.
5. Remove the HDD from the computer.
3. Use a coin to turn loose the screws on the modules.
4. Remove the battery from the compartment.
5. Remove the HDD from the computer.
To re-install the modules:
Gently push the module into the slot. Fasten the screw to fix the module. Make
sure the o-rings are firmly fixed. No sealant is necessary for the o-rings.
Gently push the module into the slot. Fasten the screw to fix the module. Make
sure the o-rings are firmly fixed. No sealant is necessary for the o-rings.
Hard Disk Drive
The Hard Disk Drive (HDD) is a 2.5” type standard serial ATA interface data
storage device.
HDD is user removable. This provides convenience and security. It can ONLY
be removed while power is OFF.
storage device.
HDD is user removable. This provides convenience and security. It can ONLY
be removed while power is OFF.