MilDef Crete Inc. RK886EX ユーザーズマニュアル
Getting Started
2
Quick Operation
• Loosen the battery screw, remove the battery insulation sheet, and then re-
position the battery for operation.
• Attach the AC adapter and charge battery for at least 10 minutes.
Turn ON the computer by pressing the power switch momentarily.
Notice:
• When ambient temperature is under 0℃, the system may
not boot up immediately.
System will beep with heater light flashing while heater
working.
After 13~15 minutes, the system will boot up automatically.
System will beep with heater light flashing while heater
working.
After 13~15 minutes, the system will boot up automatically.
• Under emergency situation, to skip heating and boot up
system immediately by pressing power button for >10
seconds
(can not guarantee all devices work properly)
seconds
(can not guarantee all devices work properly)
• Turn OFF the computer using either one of the following procedures:
1. Press power switch to “Shut down”, “Standby”* or “Hibernate”*
dependent on operating system (OS) and power management settings.
2. Press power switch for 4 seconds for a “Hard” power off.
System shuts down immediately without saving any data or
parameters.
parameters.
*: Some operating systems may not support these functions.
3. Click
Start
→ Shut Down in Windows to turn OFF.
Driver or application software installation may be necessary for further
operation.
operation.