MilDef Crete Inc. RK886EX ユーザーズマニュアル
Optional Devices
22
Resistive touch screens for direct finger touch or pen input instead of mouse or
touch pad.
touch pad.
PCMCIA Cover
Besides the attached PCMCIA rubber cover, there is an optional cover with a
metal frame that can be fixed using screws. The cover provides protection from
dust or water for cabled PCMCIA cards. Users may seal the cable outlet after
installation.
metal frame that can be fixed using screws. The cover provides protection from
dust or water for cabled PCMCIA cards. Users may seal the cable outlet after
installation.
Vehicle Adapter
Converts power from car lighters or truck batteries to DC +19V, the same output
ratings as AC adapters. It can power the system and charge the batteries
simultaneously.
ratings as AC adapters. It can power the system and charge the batteries
simultaneously.
Remove or disconnect the adapter when leaving the vehicle to avoid battery
exhaustion.
exhaustion.
Dual Battery Charger
This charger provides two slots for the Primary and Secondary battery
respectively. It allows charging of both batteries simultaneously. Accepts power
from AC adapter or Vehicle adapter. It takes approximately 3 hours to fully
charge both batteries.
respectively. It allows charging of both batteries simultaneously. Accepts power
from AC adapter or Vehicle adapter. It takes approximately 3 hours to fully
charge both batteries.
Dockunder
3 models are available:
Dockunder RT7-H: (no hot docking)
2 PCI slots, serial ports x 2, PS/2, RGB, LAN.
Ports are on the rear.(DVI option)
2 PCI slots, serial ports x 2, PS/2, RGB, LAN.
Ports are on the rear.(DVI option)
Hot docking: Docking while computer power is ON.
Dockunder RT7-V: (no hot docking)
2 PCI slots, serial ports x 2, PS/2, RGB.
Ports are on the bottom. (DP/DVI option)
2 PCI slots, serial ports x 2, PS/2, RGB.
Ports are on the bottom. (DP/DVI option)