MilDef Crete Inc. RK9 ユーザーズマニュアル

computer malfunction. 

The following procedure assumes that all the necessary ODD utilities 
were installed on the computer. For ODD utility installation, please refer to 
“Utilities and Drivers”. ODD also can be removed and swapped with the 
2

nd

 battery or 2

nd

 SATA HDD. 

 
Put disk into the ODD 
While the power is ON, push the ejecting button of ODD. The tray will 
release. Then gently pull the tray out. Put the disk with its label facing up 
on the holder and push the tray back into the cabinet. Any dirt on the data 
side of the disk may cause to the erroneous read. Please avoid touching 
the data side. 
 
Read from the ODD 
The ODD may be designated as drive D: or higher depending on your 
configuration. You may access to it in DOS or Windows. Please avoid 
shock or vibration when the optical device is active. 
 

 

The computer supports one PCMCIA II and one Express card or two 

PCMCIA II cards. To remove the card, push the button on the right of the 

card to eject it. The ejecting button can hide into the compartment by 

pushing it inward gently. 

 

 

Battery backed up RTC (Real Time Clock/Calendar) is built in an on-board 

CMOS (Complementary Metal Oxide Semiconductor) chip. The RTC 

keeps track of the time and date while the computer is off. The CMOS chip 

also stores system setup information.