MilDef Crete Inc. RT886EX ユーザーズマニュアル
Getting Started
2
Quick Operation
-
Loosen the battery screw, remove the battery insulation sheet,
and mount the battery.
and mount the battery.
-
Attach the AC adapter and charge battery for at least 10 minutes.
Turn ON the computer by pressing the power switch momentarily.
Notice:
-
When ambient temperature is under 0
к, the system may not
boot up immediately. System will beep with heater light flashing
while heater working. After 10~15 minutes, the system will boot
up automatically.
while heater working. After 10~15 minutes, the system will boot
up automatically.
-
Under emergency situation, to skip heating and boot up system
immediately by pressing power button for >10 seconds. (But can
not guarantee all devices on the computer work properly)
immediately by pressing power button for >10 seconds. (But can
not guarantee all devices on the computer work properly)
-
Turn OFF the computer using either one of the following
procedures:
1. Press power switch to “Shut Down”, “Standby”* or
procedures:
1. Press power switch to “Shut Down”, “Standby”* or
“Hibernate”* dependent on operating system (OS) and power
management settings.
management settings.
2. Press power switch for 4 seconds for a “Hard” power off.
System shuts down immediately without saving any data or
parameters.
parameters.
*: Some operating systems may not support these
functions.
3. Click Start
o Shut Down in Windows to Turn OFF.
Driver or application software installation may be necessary for
further operation.
further operation.