MilDef Crete Inc. RT886EX ユーザーズマニュアル
Useful Information
7
USEFUL INFORMATION
Location
A clean and moisture-free environment is preferred. Make room for
air circulation. Avoid areas with:
-
air circulation. Avoid areas with:
-
Sudden or extreme changes in temperature.
-
Extreme heat.
-
Strong electromagnetic fields (near television set, motor rotation
area, etc.).
area, etc.).
-
Dust or high humidity.
If it is necessary to work in a hostile environment, please regularly
maintain your computer by cleaning dust, water, etc. and keep it in
optimal condition.
maintain your computer by cleaning dust, water, etc. and keep it in
optimal condition.
Ruggedness
The computer is designed with rugged features such as vibration,
shock, dust, and rain/water protection. However, it is still necessary
to provide appropriate protection while operating in harsh
environments.
The computer is designed to withstand rainfall from top with mild
wind blowing only. Please keep the keyboard facing up, i.e. normal
operating direction, to maintain water resistance. NEVER immerse
the unit in water, or spray water at an upside-down system. Doing so
may cause permanent damage.
The D-sub connector caps on the rear of the computer are for dust
and shock protection. The connectors are sealed internally. Other I/O
ports and devices on the left or right must have caps tightly closed or
cable inlets sealed while exposed to water or dust.
There are optional gaskets for DB-9 and DB-25 connectors. You may
install them to improve rain/dust/moisture resistance on your
commercial type cable. Insert the packing into the male connector
(with pins) and fasten the screws.
All connectors will be corroded if exposed to water or moisture.
shock, dust, and rain/water protection. However, it is still necessary
to provide appropriate protection while operating in harsh
environments.
The computer is designed to withstand rainfall from top with mild
wind blowing only. Please keep the keyboard facing up, i.e. normal
operating direction, to maintain water resistance. NEVER immerse
the unit in water, or spray water at an upside-down system. Doing so
may cause permanent damage.
The D-sub connector caps on the rear of the computer are for dust
and shock protection. The connectors are sealed internally. Other I/O
ports and devices on the left or right must have caps tightly closed or
cable inlets sealed while exposed to water or dust.
There are optional gaskets for DB-9 and DB-25 connectors. You may
install them to improve rain/dust/moisture resistance on your
commercial type cable. Insert the packing into the male connector
(with pins) and fasten the screws.
All connectors will be corroded if exposed to water or moisture.