MilDef Crete Inc. RT9 ユーザーズマニュアル
Chapter Two - 20
Operating Information
To install expansion card in DockUnder:
1. Unplug the AC adapter.
2. Release and remove the computer.
3. Remove the screws on the upper and lower covers.
4. Open the upper cover.
5. Install the expansion card into the slot and fix the L-bracket.
6. Assemble the upper cover.
7. Attach
1. Unplug the AC adapter.
2. Release and remove the computer.
3. Remove the screws on the upper and lower covers.
4. Open the upper cover.
5. Install the expansion card into the slot and fix the L-bracket.
6. Assemble the upper cover.
7. Attach
the
computer
and perform functions test.
IRQ
DMA
0.
Timer output 0
0
Sound
1. KB
1 Sound
2. 8 RTC
2 FDD
9 ACPI (or Free)
3
Reserved (or ECP/EPP)
10 Free (16-bit PCMCIA, or COM3*)
11 PCI devices or Card Bus 0/1 (Sound, LAN*, 32-bit PCMCIA, etc.)
12 Touch pad (PS/2 mouse)
13 Co-processor
14 HDD
15 DVD-ROM drive
11 PCI devices or Card Bus 0/1 (Sound, LAN*, 32-bit PCMCIA, etc.)
12 Touch pad (PS/2 mouse)
13 Co-processor
14 HDD
15 DVD-ROM drive
3. COM2 (or Fax/Modem*, IrDA)
4. COM1 (or Touch screen)
5. Free
4. COM1 (or Touch screen)
5. Free
(COM4*)
6. FDD
7. Parallel port 1
*: Optional devices.
7. Parallel port 1
*: Optional devices.
Note:
¾
Please check IRQ conflict before installing cards and drivers.
¾
Never dock or un-dock the computer while power is ON.