MilDef Crete Inc. RT9 ユーザーズマニュアル

 

Advanced Menu Selections 
 
You can make the following selections on the Advanced Menu. 
   

Boot-time 
Diagnostic Screen 

Enable 
Disabled 

Display the diagnostic screen during 
boot 

QuickBoot Mode 

Enable 
Disabled 

Allows the system to skip certain tests 
while booting. This will decrease the time 
needed to boot the system. 

IGD - Boot Type 

VBT Default 
CRT 
LFP 
CRT+LFP 
EFP 
CRT+EFP 

Select the Video Device that will be 
activated during POST 

PS/2 Mouse 

Auto Detect 
Disabled 
Enabled 

“Disabled” prevents any installed PS/2 
mouse from functioning, but frees up IRQ 
12. “Enabled” forces the PS/2 mouse 
port to be enabled regardless if a mouse 
is present. “Auto Detect” will enable the 
PS/2 mouse only if present. “OS 
Controlled” only displayed if the OS 
controls the mouse. 

PCI Express Port 
#1 

Enabled 
Auto 
Disabled 

Disabled – Port always disabled. (If Port 

#1 is disabled), then the rest 
of the Ports will also be 
disabled.) 

Enabled – Port always enabled. 
Auto – Only enable if card found. 

Device 29 USB 
2.0 Enable 

Enable 
Disabled 

Enables Device 29 USB 2.0 functionality.

Passive Cooling 
Trip Point 

15 C/23 C/31 C/39 C/ 
47 C/55 C/63 C/71 C/ 
79 C/87 C/95 C/103 C/
109 C/111C 
Disabled 

This value controls the temperature of 
the ACPI Passive Trip Point – the point in 
which the OS will begin throttling the 
CPU. 
 
Note: When the DTS is enabled, only 
values below 97C are valid. 

Core 
Multi-Processing 

Enable 
Disabled 

Determines whether the 2nd core is 
enabled. 
 
Disabled = 2nd core is disabled. 
Enabled = 2nd core is enabled.