Charles Machine Works Inc The 2150GRDUO ユーザーズマニュアル
2150GR Ground Penetrating Radar
054-140 - Rev. 2
20/36
5.3.3 Advanced Settings
Double-click the upper gray bar of the Gain Calibration window to open the advance
settings window. (See section 5.3.2 Pre-Acquisition Commands.)
settings window. (See section 5.3.2 Pre-Acquisition Commands.)
Use the guide below to choose the settings appropriate for your survey.
Advanced settings window
¾ Wheel Setting: Select the acquisition mode of the system.
• Wheel driven: In this mode, the radar acquisition is set using the position sensor.
• Auto stacking: In this mode, the radar acquisition is set using the number you
• Auto stacking: In this mode, the radar acquisition is set using the number you
enter in the auto stacking field.
¾ Ground Type: Use the Rough Terrain setting when the ground conditions cause
excessive vibration. When this option is selected, radar data is temporarily saved on an
external device (such as a flash memory stick) during the acquisition phase.
external device (such as a flash memory stick) during the acquisition phase.
¾ Measure Unit: Select m/cm or foot/inch as the measurement unit to be applied to the
real time radar map.
¾ Swap Axis: Select m or nsec to modify the vertical scale of the radar map.
¾ Gain Application: Select to view the real time radar map with or without gain applied.
¾ Background Removal: Select to view the acquired radar maps with or without the
Clear_x application.
¾ Language: Select to view the software interface in Italian (ITA) or English (ENG).
5.3.4 Acquisition commands
Use the Acquisition Selection Window to start data acquisition.