Charles Machine Works Inc The 2450GR ユーザーズマニュアル

To open the advanced settings 
window, press the gray bar twice. In 
this window you can customize the 
way information is displayed. 

•

Wheel driven (default): radar acquisition is set using the 
position sensor. 

•

Auto stacking: Radar acquisition is set using a number you 
enter. 

•

Rough terrain: Select this setting when ground conditions 
cause excessive vibration. In this mode, radar data is 
temporarily saved on an external device during the acquisition 
phase. 

•

Device: Select the computer port the external device is 
connected to.

Measure Unit: Select standard or metric measurement units.

Swap Axis: Select m or nsec to modify the vertical scale of the radar 
map.

Background Removal: Select this option to viewed radar maps with or 
without the Clear_x application. 

Gain Application: Select this option to view the real time radar map 
with or without gain applied.

Language: Select to view the software interface in Italian or English. 

Indicators for radar, battery, 
acquisition speed, and acquired 
sweeps light when active. 

Select shallow (high frequency, 
700MHz)

Select deep (low frequency, 250 MHz)

The 2450GR transmits, 
receives, and records both 
frequencies at all times. Use 
this button to view low, high, 
or both frequencies while 
scanning.  

To exit Acquisition Software, press.