Charles Machine Works Inc The 752TKR ユーザーズマニュアル
24
750/752 Tracker - OPERATION
BEACON TRACKING MODES
24
750/752 Tracker - OPERATION
BEACON TRACKING MODES
Roll Calibration
Calibrate roll display to 12:00 for use with mud motors or similar
tools:
tools:
1.
Place beacon in housing. Place housing at the 12:00
position.
position.
IMPORTANT: Depending on beacon insertion, tracker may
not show 12:00 roll.
not show 12:00 roll.
2.
Push and hold F/A/L/R key and press depth key for 3
seconds.
seconds.
3.
Continue pressing F/A/L/R key and roll will set to 12:00.
Reset to actual roll:
1.
Push and hold F/A/L/R key and press depth key for 3
seconds.
seconds.
2.
Continue pressing F/A/L/R key and press down arrow key
once.
once.
Roll Calibration
Calibrate roll display to 12:00 for use with mud motors or similar
tools:
tools:
1.
Place beacon in housing. Place housing at the 12:00
position.
position.
IMPORTANT: Depending on beacon insertion, tracker may
not show 12:00 roll.
not show 12:00 roll.
2.
Push and hold F/A/L/R key and press depth key for 3
seconds.
seconds.
3.
Continue pressing F/A/L/R key and roll will set to 12:00.
Reset to actual roll:
1.
Push and hold F/A/L/R key and press depth key for 3
seconds.
seconds.
2.
Continue pressing F/A/L/R key and press down arrow key
once.
once.