Charles Machine Works Inc The 752TKR0408 ユーザーズマニュアル
750/752 Tracker - CONTROLS
9
CONTROLS
750/752 Tracker - CONTROLS
9
CONTROLS
Depth + On/Off
Pressing these buttons when tracker is on cycles volume from
low to high to off. Pressing and holding depth button before
turning tracker on changes signal strength display. See “Signal
Strength” section later in this chapter for more information.
low to high to off. Pressing and holding depth button before
turning tracker on changes signal strength display. See “Signal
Strength” section later in this chapter for more information.
Depth + Fore/Aft/Left/Right
Pressing these buttons switches LCD backlight off and on.
Depth + Up
Pressing these buttons enters tracker into calibration mode. See
OPERATION for further information.
OPERATION for further information.
Depth + Down
Pressing these buttons selects radio channel. 750 - Off, CH1,
CH2 will appear in display. 752 - Off, CH1, CH2, CH3, CH4, CH5,
CH6, CH7, CH8, CH9 will appear in display.
CH2 will appear in display. 752 - Off, CH1, CH2, CH3, CH4, CH5,
CH6, CH7, CH8, CH9 will appear in display.
Depth + Mode
Pressing these buttons changes depth units from default setting
of feet•inches to inches, centimeters, or meters.
of feet•inches to inches, centimeters, or meters.
Down + On
Holding down button while turning unit on toggles gain control
from auto to manual. Display will show “Auto” if in automatic gain
mode, and will be blank if in manual gain mode.
from auto to manual. Display will show “Auto” if in automatic gain
mode, and will be blank if in manual gain mode.
Depth + On/Off
Pressing these buttons when tracker is on cycles volume from
low to high to off. Pressing and holding depth button before
turning tracker on changes signal strength display. See “Signal
Strength” section later in this chapter for more information.
low to high to off. Pressing and holding depth button before
turning tracker on changes signal strength display. See “Signal
Strength” section later in this chapter for more information.
Depth + Fore/Aft/Left/Right
Pressing these buttons switches LCD backlight off and on.
Depth + Up
Pressing these buttons enters tracker into calibration mode. See
OPERATION for further information.
OPERATION for further information.
Depth + Down
Pressing these buttons selects radio channel. 750 - Off, CH1,
CH2 will appear in display. 752 - Off, CH1, CH2, CH3, CH4, CH5,
CH6, CH7, CH8, CH9 will appear in display.
CH2 will appear in display. 752 - Off, CH1, CH2, CH3, CH4, CH5,
CH6, CH7, CH8, CH9 will appear in display.
Depth + Mode
Pressing these buttons changes depth units from default setting
of feet•inches to inches, centimeters, or meters.
of feet•inches to inches, centimeters, or meters.
Down + On
Holding down button while turning unit on toggles gain control
from auto to manual. Display will show “Auto” if in automatic gain
mode, and will be blank if in manual gain mode.
from auto to manual. Display will show “Auto” if in automatic gain
mode, and will be blank if in manual gain mode.