Charles Machine Works Inc The 8500TKR ユーザーズマニュアル

Messages that communicate tracking system 
information requiring user intervention or provide 
important operation information appear in the top 
center area of the display as shown.

 

SATURATED

Signal from beacon or other noise is too large to 
receive accurate signal.

Move tracker away from 
beacon (at least 2’/610 mm) 
or eliminate noise source.

Auto-Gain Active...

Tracker’s auto-gain feature is active. Some 
features and data values will stop updating until 
auto-gain is complete.

Wait until message 
disappears.

Beacon Regulating

Beacon is adjusting its output to provide a stable 
signal. Depth values and beacon calibration are 
unavailable while beacon is regulating.

Wait until message 
disappears.

BEACON BATT LOW

Beacon battery voltage is low.

Replace Power Stick or 
lithium beacon batteries.

BEACON POWER 
LOW

Beacon is close to being unable to provide a 
stable output signal (is out of throttle).

1.

Replace Power Stick 
beacon battery. 

2.

Use lithium beacon 
battery.

3.

Change to compatible 
beacon housing or call 
your Ditch Witch dealer.

TILT

The tracker can no longer compensate for its 
position when calculating depth and offset 
values. This occurs when the tilt of the tracker is 
greater than 20° or the beacon pitch is greater 
than 10% and the tracker tilt is greater than 5°.

Adjust tracker so it is closer 
to level until message 
disappears.