Canon DR-3010C 3093B002AE/AF ユーザーズマニュアル
製品コード
3093B002AE/AF
Chapter 2 Basic Operation
- 16 -
2
3
Place the card horizontally, turn it upside down and face down, with the top
fed through the scanner first.
fed through the scanner first.
CAUTION
Vertically placed cards may not be output properly, and cards that get jammed
may be damaged when you remove them. Make sure to place cards in the
proper orientation.
may be damaged when you remove them. Make sure to place cards in the
proper orientation.
Folio Scan enables you to scan documents that are larger than LTR/A4 and,
therefore, do not fit in the feeder. (The maximum size is 11" x 17"/A3.) To use
the function, fold the document in half lengthwise and place it into the feeder.
The DR-3010C will scan both sides and combine the scanned images into a
single image.
therefore, do not fit in the feeder. (The maximum size is 11" x 17"/A3.) To use
the function, fold the document in half lengthwise and place it into the feeder.
The DR-3010C will scan both sides and combine the scanned images into a
single image.
IMPORTANT
•
When folding the document, align the right and left sides and create a sharp,
straight fold. Otherwise the document may jam or the image may not be aligned
properly.
straight fold. Otherwise the document may jam or the image may not be aligned
properly.
•
The fold line itself will not be scanned. Keep this in mind if there is content
such as photos, diagrams, or text that spans the fold.
such as photos, diagrams, or text that spans the fold.
•
For Folio scanning, only the Bypass mode can be used. Place documents one
at a time.
at a time.
•
Adjust the document guides to fit the width of the document. Otherwise, the
image may scan as skewed or shifted.
image may scan as skewed or shifted.
Placing Folded Documents