Yick Shun Electronic Toys Manufactory Ltd YS268 ユーザーズマニュアル
YS268 Single Function Remote Control Car
Battery Installetion:
-Transmitter:
1. Remove battery cover
2. Insert one 9Volt battery into the battery compartment
3. Replace battery cover firmly.
- Vehicle:
1. Remove battery cover
2. Insert 4 UM-3 1.5 Volt (AA) batteries into the battery compartment.
3. Replace battery cover firmly.
Operating Instruction:
1. Turn the car switch to “ON” position.
2. Operate the car with transmitter.
3. Push and release the shaft to start the car in forward direction/ Reverse turning.
4. Turn the car’s switch to the “OFF” position after used.
5. Remove all batteries from the transmitter and car
Battery Installetion:
-Transmitter:
1. Remove battery cover
2. Insert one 9Volt battery into the battery compartment
3. Replace battery cover firmly.
- Vehicle:
1. Remove battery cover
2. Insert 4 UM-3 1.5 Volt (AA) batteries into the battery compartment.
3. Replace battery cover firmly.
Operating Instruction:
1. Turn the car switch to “ON” position.
2. Operate the car with transmitter.
3. Push and release the shaft to start the car in forward direction/ Reverse turning.
4. Turn the car’s switch to the “OFF” position after used.
5. Remove all batteries from the transmitter and car
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modification could void the
user’s authority to operate the equipment.
unauthorized modifications to this equipment. Such modification could void the
user’s authority to operate the equipment.
YICK SHUN ELEC TOYS
FCC ID : J7IYS268
JOB # : 973H1
EXHIBIT # : 5
FCC ID : J7IYS268
JOB # : 973H1
EXHIBIT # : 5