GIGA-BYTE TECHNOLOGY CO. LTD. GN-BR02G ユーザーズマニュアル
GN-BR02G 2.4GHz Wireless Broadband Router
6
Chapter 3
Before You Start
What You Will Need
Internet
You will need to have an active Internet account, supplied through either ADSL
or cable Modem, and your ISP user account and password information. (Your
ISP can supply you with this)
or cable Modem, and your ISP user account and password information. (Your
ISP can supply you with this)
Hardware Requirements
A minimum of one PC with an installed Ethernet NIC (network interface card).
(If you have a DSL or Cable modem broadband connection to the Internet, you
should already have this). If you wish to connect wirelessly to your BR02G from
a laptop, a wireless network PCMCIA notebook card is needed, and this
manual assumes it is already properly installed.
(If you have a DSL or Cable modem broadband connection to the Internet, you
should already have this). If you wish to connect wirelessly to your BR02G from
a laptop, a wireless network PCMCIA notebook card is needed, and this
manual assumes it is already properly installed.
System Requirements
The BR02G will work with Windows, Macintosh or Linux Operating System.
You just need a HTTP standard JavaScript-enabled browser, for example,
Microsoft Internet Explorer or Netscape Navigator 4.0 or above.
You just need a HTTP standard JavaScript-enabled browser, for example,
Microsoft Internet Explorer or Netscape Navigator 4.0 or above.
ISP Configuration Information
Depending on the type of ISP connection you have, you may need one or more
of the following configuration parameters.
of the following configuration parameters.
9 ISP User ID and Password
9 ISP Domain Name Server (DNS)
9 Fixed IP address or Static IP address
9 Subnet
9 ISP Domain Name Server (DNS)
9 Fixed IP address or Static IP address
9 Subnet
Mask
9 Default
Gateway
9 Host and Domain Names
If you are unsure of any of these settings, contact your ISP customer service.