Zebex Industries Inc BTS-3392 ユーザーズマニュアル

 

 

 

 
 
 
 

Scan Window 

Emits a red beam for barcode reading 

LED Indicator 

Indicates the scanning status   

Power Button/Scan Trigger 

Press and hold for 3 second until a long beep is 
heard to turn power on or press to scan barcodes 

Hand Strap Hole 

Used to attach hand straps 

Battery Compartment 

Batteries are stored here 

Micro USB slot 

Used for communication and charging 

 

 

Items contain in the package may vary depending on the model of the scanner. 

Wireless scanner with battery /   

Scanner cradle (optional) 

 

   (with cradle)  

 

  (without cradle)

Li-ion battery pack 

 

Communication cable for cradle 

(optional) 

 

Mini USB B to mini USB A cable 

 

5V USB Power adapter 

 

 

Cable clip 

 

 

*Note: Actual product appearance may vary from the images on this page.   

Installing Battery 

1. 

Unscrew the cap from the battery compartment at the   
bottom of the scanner and insert the battery.   

 

2. 

Make sure the red tag on the battery is tugged in   
and not blocking the cable connector and close the cap.   

 

3. 

Tighten the screw on the cap to secure the battery. 

Connect the Cradle 

 

Connect the Device with Cradle or USB cable 

Approx. charging time: 4.5~6 hours

 

          or       

 

Micro USB 

slot 

LED  

Indicator 

Hand Strap 
Hole 

Battery 
Compartment

 

Scan  
Window

 

Power Button/ 

Scan Trigger 

Communication cable 

Mini USB B to USB power adaptor   
only