Kyocera Corporation IUC19AA ユーザーズマニュアル

Connection with PC                                                               
 

In order to use iBurst Access Card, your computer must satisfy the following requirements: 

・

PC Card Slot-TypeⅡcompliant with PC Card Standard 95 or later. 

・

PC-AT Compatible PC running WindowsXP/2000/Me/98Se or Mac OS X(MacOSX v10.1.5 or later). 

 
How to connect                                                                                                                                                   
If this is the first time that iBurst Access Card is to be used on your computer, it is necessary to 
install the device driver first. (Refer to “iBurst Software installation” on page 9). 
 
The following describes the procedure how to connect iBurst Access Card with your computer. 
 
1    Turn on the power to the computer. 
 
2    Insert iBurst Access Card into the computer’s PC Card Slot and make sure it is fully fitted in 

the slot. 

 
3  Double click the icon of PC Card on the computer’s task tray, and you should see the device 

name [iBurst Modem] in the hardware device list of the appearing PC Card dialog window. 

 
How to remove                                                                                   
1    Double click the icon of PC Card on the computer’s task tray, and click the [Stop] button in the 

appearing PC Card  dialog window. Make sure that you select [iBurst Modem] in the PC Card 
dialog window before click the [Stop] button. 

 
2    A popup dialog window with the message [Safe To Remove Hardware] should appear. Click the 

Ok button in the dialog window. 

 
3    Remove iBurst Access Card from the computer’s PC Card Slot.

 

 
 
 
 
 
 
 
 
 
 

- 5 -