Lutron Electronics Company Inc 0020 ユーザーズマニュアル
Please Read Before Installing
RF Designer-Style Keypads
HRD-5KP, -5RL, -10KP, -10RL
120/127VAC, 50/60Hz
120/127VAC, 50/60Hz
Installation Instructions
Overview
The HRD-5KP, -5RL and HRD-10KP, -10RL keypads
are for use with HomeWorks systems. The keypad
buttons are programmed with a personal computer
using the HomeWorks Utility.
are for use with HomeWorks systems. The keypad
buttons are programmed with a personal computer
using the HomeWorks Utility.
Up to 32 keypads, each with a unique address, can be
assigned to each HomeWorks RF Processor.
assigned to each HomeWorks RF Processor.
HRD-5KP
HRD-10KP
HRD-10RL
HRD-5RL
Important Notes
Codes: Install in accordance with all local and national
electrical codes.
electrical codes.
Environment: Ambient operating temperature:
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
Wallplates: Lutron Claro
®
and Satin Colors
TM
wallplates
are recommended for best color match and clean aes-
thetic appearance. Do not paint controls or wallplates.
thetic appearance. Do not paint controls or wallplates.
Cleaning: Clean with a soft damp cloth only. Do not use
any chemical or abrasive cleaners.
any chemical or abrasive cleaners.
Wallboxes: Lutron recommends using 3.5" (89mm) deep
wallboxes for easier installation.
wallboxes for easier installation.
RF Device Placement: RF Keypads must be located
within 30 feet (9m) of an RF Signal Repeater or an RF
Processor.
within 30 feet (9m) of an RF Signal Repeater or an RF
Processor.
RF Keypads will not function until they are addressed
and programmed. See the HomeWorks Utility online
help.
and programmed. See the HomeWorks Utility online
help.