Lutron Electronics Company Inc 0024 ユーザーズマニュアル
Codes: Install in accordance with all local and national
electrical codes.
electrical codes.
Environment: Ambient operating temperature:
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
Cleaning: Clean with a soft damp cloth only. Do not use
any chemical or abrasive cleaners.
any chemical or abrasive cleaners.
RF Device Placement: RF Signal Repeaters must be
located within 60 feet (18m) of an RF Processor or
another RF Signal Repeater.
located within 60 feet (18m) of an RF Processor or
another RF Signal Repeater.
Power: Use only the DC adapter provided by Lutron with
your unit (Lutron model # T120-9DC-3-WH).
your unit (Lutron model # T120-9DC-3-WH).
Caution - Using a DC adapter not rated at the
following specifications could damage the con-
trol and possibly overheat the DC adapter.
following specifications could damage the con-
trol and possibly overheat the DC adapter.
• Input: AC 120/127V 50/60Hz
• Output: DC 9V/300mA Class 2
• Output: DC 9V/300mA Class 2
Please Read Before Installing
Installation Instructions
Overview
The HomeWorks RF Signal Repeater provides additional
coverage area for Radio Frequency (RF) signals sent
between HomeWorks RF Dimmers/Switches, and RF
Keypads. Each RF Signal Repeater covers approximately
2500 square feet (232m
coverage area for Radio Frequency (RF) signals sent
between HomeWorks RF Dimmers/Switches, and RF
Keypads. Each RF Signal Repeater covers approximately
2500 square feet (232m
2
) of living space.
RF Signal Repeater
HR-REP-SW
120/127VAC, 50/60Hz (DC Adapter)
120/127VAC, 50/60Hz (DC Adapter)
AUXILI
ARY
ACTIVATE
TEST
HR-REP-SW