Trimble Inc. TC900C ユーザーズマニュアル
SNR900 Operation Manual 1 1
Configuring the SNR900 3
3.3.1
Connecting to the SNR900
1.
Connect a SNR900 machine service cable to the SNR900.
2.
Connect the I/O DB-9 connector of the service cable to a serial
port on your office computer.
port on your office computer.
Note – Figure 4.7 on page 27 shows an infrastructure cable
(PN 38968-25) connected to the SNR900. Figure 4.10 on
page 30 shows the service cable (PN 40942-xx) connected to
the SNR900 and an office computer.
(PN 38968-25) connected to the SNR900. Figure 4.10 on
page 30 shows the service cable (PN 40942-xx) connected to
the SNR900 and an office computer.
3.
Provide power to the radio through the power lead of the service
cable.
cable.
3.3.2
Configuring the SNR900
1.
Start WinFlash on your office computer. The following dialog
appears:
appears:
2.
Select the appropriate Device type option and PC serial port
option and click
option and click
Next
.
SNR900.book Page 11 Friday, December 3, 2004 2:02 PM