Trimble Inc. 613 ユーザーズマニュアル
802.11g Wireless LAN+BT SiP combo Module V2.2
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
Preliminary release for evaluation, Subject to be changed without Notice
Final certification (module certification) requires the antenna of targeted system with a lead-
time of 6 weeks. The product deliverable shall be a pre-tested WM-BG- MR-01 module. No
module level certification on WM-BG-MR-01 module.
9.1. EMC
The module will be pre-tested to ensure that we can certify the product in the following
countries when final certification will be performed on products and or platforms.
countries when final certification will be performed on products and or platforms.
•
US. FCC CFR47 Part 15-B, Class B
•
Canada. CSA C22.2, Class B
•
Europe. 89/336/EEC, EMC Directive, including CE Mark
•
ETS300 826, EMC standard for 2.4GHz wideband transmission systems
•
EN55022, Class B (Emissions)
EN50082-1 (Immunity)
EN61000-3-2 (Harmonic AC current emissions)
EN50082-1 (Immunity)
EN61000-3-2 (Harmonic AC current emissions)
•
Japan. VCCI Standard, Class 2 (Emissions)
•
Korea (MIC)
9.2. PRODUCT SAFETY SPECIFICATION
The WM-BG-MR-01 module is tested and pass successfully the following criteria;
The testing is to assure the quality of safety requirement on module. Final certification will
be conducted on system level.
The testing is to assure the quality of safety requirement on module. Final certification will
be conducted on system level.
•
UL1950 /CSA C22.2.950
•
EN60 950 (IEC 950)
•
CB scheme certification from National certification body as listed in CB bulletin No. 96A.
•
9.3. COMPONENT SPECIFICATION
All components used in this device meet the following component approval requirements.
PRINTED WIRING BOARDS: The printed wiring boards shall be Underwriters
Laboratories Inc. "Recognized Component" (ZPMV2) under the category for Printed
Wiring Boards, and shall be flammability rated 94V-1 or less flammable. The board
material shall be rated 130°C minimum.
PRINTED WIRING BOARDS: The printed wiring boards shall be Underwriters
Laboratories Inc. "Recognized Component" (ZPMV2) under the category for Printed
Wiring Boards, and shall be flammability rated 94V-1 or less flammable. The board
material shall be rated 130°C minimum.
CONNECTORS: Any connectors, if used, shall be Underwriters Laboratories, Inc.
"Recognized" (ECBT2/RTRT2) in accordance with the requirements in the UL Standard
for Safety, UL 498. Any polymeric connector housing shall be molded of plastics rated
UL 94V-2 or less flammable when tested to UL 94.