Hughes Network Systems HNS9105 ユーザーズマニュアル
Thuraya IP Voyager User Guide
11
check this box and enter an IP address only if directed to do so
by your Service Provider.
by your Service Provider.
DMZ Host: If you wish to route incoming network originated IP traffic to a
specific connected device, enter that device’s IP address in this
parameter. Be careful to establish a suitable firewall on this device to
protect against malicious attacks from the Internet.
Port Forwarding: Port forwarding is a feature that allows user-specified
global ports to be connected to user-specified TE devices. This mode
allows incoming IP traffic to be reliably delivered to the specified TE IP
address based upon the global port number the traffic was received on.
To enable/disable and to set up rules for port forwarding, click on the
Configure Port Forwarding link to go to the Port Forwarding
Configuration screen.
specific connected device, enter that device’s IP address in this
parameter. Be careful to establish a suitable firewall on this device to
protect against malicious attacks from the Internet.
Port Forwarding: Port forwarding is a feature that allows user-specified
global ports to be connected to user-specified TE devices. This mode
allows incoming IP traffic to be reliably delivered to the specified TE IP
address based upon the global port number the traffic was received on.
To enable/disable and to set up rules for port forwarding, click on the
Configure Port Forwarding link to go to the Port Forwarding
Configuration screen.
P
ORT
F
ORWARDING
C
ONFIGURATION
S
CREEN
Note that a new PDP context is required for Port Forwarding changes to
take effect. Port Forwarding is not compatible with relay mode and is
disabled automatically when relay mode is enabled.
APN Selection: If use of multiple Internet Service Providers is required, you
can modify the current Access Point Name (APN) value. You should
modify these fields only if directed to do so by your Service Provider. The
take effect. Port Forwarding is not compatible with relay mode and is
disabled automatically when relay mode is enabled.
APN Selection: If use of multiple Internet Service Providers is required, you
can modify the current Access Point Name (APN) value. You should
modify these fields only if directed to do so by your Service Provider. The