JVC KENWOOD Corporation 378601 ユーザーズマニュアル

20

Note:  DTMF calls can be made only in analog Operation.

■

1  Press and hold the microphone PTT switch.
2  Enter the desired digits using the microphone keypad.

•  The corresponding DTMF tones sound each time you press a key.

•  If you release the microphone 

PTT switch, transmit mode will end even if the 

complete number has not been sent.

■

  If your dealer has activated the Keypad Auto PTT function, simply press the 

microphone keys to make the call.

•  The DTMF code will be sent automatically when you press a key.

■

1  Press the key programmed as Autodial.
2  Enter the desired digits using the microphone keypad.

•  The digits appear on the display as you enter them.
•  Alternatively, you can enter digits by using 

the  /  keys

 {page 4}.

•  You can enter up to 30 digits before transmitting.

3  After entering the complete number, press the microphone PTT switch or 

the 

 key to transmit.

Note:  If you switch the power OFF before transmitting the number, the number will be cleared.

Autodial allows you to quickly call DTMF numbers that have been programmed 

onto your transceiver.
1  Press the key programmed as Autodial, or access the Autodial function 

through the Menu {page 2}.

•  The first entry in the Autodial list appears on the display.

2  Press the  /  keys or enter the appropriate DTMF number (0 ~ 32) to select 

your desired Autodial list number.

•  The stored entry appears on the display.

3  Press the microphone PTT switch to make the call.

This function is used when a transceiver is stolen or lost.  When the transceiver 

receives a call containing a stun code, either transmit mode will be disabled, 

or both receive mode and transmit mode will be disabled.  The stun code is 

cancelled when the transceiver receives a call with a revive code.