JVC KENWOOD Corporation 378601 ユーザーズマニュアル

28

Your dealer can activate a variety of transceiver functions to perform without any 

additional operation on your part.

The Time-out Timer is used to prevent any caller from using a channel for an 

extended period of time.
If you continuously transmit for a period of time that exceeds the programmed 

time, the transceiver will stop transmitting and an alert tone will sound.  To stop 

the tone, release the microphone 

PTT switch. Your dealer can program the TOT 

time in the range of 5 seconds to 20 minutes.
If programmed by your dealer, a pre-alert tone will sound before the timer expires.  

Also, if programmed by your dealer, you may have to wait for a short duration 

before you can continue to transmit.  If you press the microphone 

PTT switch 

before the timer has been reset, an alert tone will sound and the transceiver will 

not enter transmit mode.

The signal strength indicator displays the strength of received calls.

 

Strong signal

 

Sufficient signal

   

Weak signal

   

Very weak signal

    

No icon appears when no signal is available

  Flashes when out of range (NXDN Trunking only)

The compander can be programmed only for specific FM channels.  If it has been 

programmed by your dealer, transmitted signals are compressed before being 

sent and received signals are expanded when they arrive.

•  Your dealer must set the compander for both the transmit side and the receive side in 

order for the compander to operate.

This background feature allows higher clarity of signals, avoiding excessive noise.  

This feature is not used on digital channels, as they are not susceptible to noise 

and interference.