JVC KENWOOD Corporation 378601 ユーザーズマニュアル

5

!1

 

 key 

Press to activate its programmable function {page 7}.  The default setting is 

Zone Down.

!2

 

 key 

Press to activate its programmable function {page 7}.  The default setting is 

Zone Up.

!3

 

 

key 

Press to activate its programmable function {page 7}.  The default setting is 

None (no function).

!4

 

Speaker 

Internal speaker

!5

 

PTT (Push-to-Talk) switch 

Press and hold this switch then, speak into the microphone to call a station.

Appears when the Monitor or Squelch Off function is 

activated.
Blinks when signaling of an incoming call matches the 

Optional Signaling set up on your transceiver.
Appears when the current zone (left icon) or CH/GID (right 

icon) is added to the scanning sequence.
Appears when you are using Scan mode.  Blinks while 

paused at a channel.
Appears when there is a message stored in the transceiver 

memory.  Blinks when a new message has arrived.
Appears when the current channel is programmed as a 

Priority channel.  “ ” represents Priority channel .  “ ”  

represents Priority channel 2.  “ ” represents Priority 

channels  and 2.
Appears when the Operator Selectable Tone (OST) function 

is activated.
Appears when the call is a Telephone ID call.  Blinks when 

Auto Telephone Search is activated.  (The location of this 

icon is the same as the OST icon.)

Appears when the Talk Around function is activated.