JVC KENWOOD Corporation 39923120 ユーザーズマニュアル

17

Note:  Scan programming is only available when using Conventional operation.

Using the key programmed as Scan Program, you are able to reprogram your 
scan list.

1 Press the key programmed as Scan Program.

• The

 (KCH-14 ) or 

SCAN

 (KCH-15) icon appears on the display and blinks.

2 Press the GRP

 and 

 keys or rotate the CH control to select the zone 

and channel you will add to or remove from the Scan list.

• Press the PF 4 key to toggle between Zone Select and Channel Select.

3 Press the PF 2 key to add or remove the selected zone or channel to/ from the 

scan list.

• The channel add indicator (KCH-14:

/ KCH-15:

) will 

appear on the display when the selected channel is added to the scan sequence.

If the Priority channel has been set as Operator Selectable by your dealer, you 
are able to reprogram the Priority mode as well.

1 Press the key programmed as Scan Program.

• The

 (KCH-14) or 

SCAN

 (KCH-15) icon appears on the display and blinks.

2 Press the GRP

 and 

 keys or rotate the CH control to select the zone 

and channel you will add to or remove from the Scan list.

• Press the PF 4 key (the forth key from the left, after the CH control) to toggle 

between Zone Select and Channel Select.

3 Press the PF 3 key.

4 Press the PF 4 key to toggle the selected channel between Priority mode and 

Normal mode.

•

“P1”, “P2”, or “PP” appears on the sub-display when Priority mode is 
selected.

5 Press the PF 3 key again to set the new channel setting.