JVC KENWOOD Corporation 39923120 ユーザーズマニュアル

25

Note:
X The Scrambler function can be used only in Conventional FM Operation.  Additionally, the 

Voice Scrambler board must be installed before this function can be activated.

X Ask your dealer for details concerning the Voice Scrambler board and the Encryption DES/AES 

settings.

Press the key programmed as Scrambler/ Encryption to switch the transceiver 
to secure (encrypted) transmission.

• The

 (KCH-14) or 

OPT

 (KCH-15) icon appears on the display.

• Pressing the microphone PTT switch after the Scrambler or Encryption function has 

been turned ON encrypts the transmitted signal.

• Each group member must activate their respective Scrambler/ Encryption functions to 

descramble the received signals.

1 Press the key programmed as Scrambler/ Encryption Code or press and 

hold the key programmed as Scrambler/ Encryption for 1 second, to enter 
Code Selection mode.

2 Press the GRP

 and 

 keys or rotate the CH control to increase or 

decrease the Scrambler code.

• There are 16 available Scrambler codes (1 ~ 16).

• Each group member must use the same code  in order for the transceivers to 

descramble the received signals.

3 Press the PF 1, PF 2, or PF 3 key to exit Code Selection mode.

1 Press the key programmed as Scrambler/ Encryption Code or press and 

hold the key programmed as Scrambler/ Encryption for 1 second, to enter 
Key Selection mode.

2 Press the GRP

 and 

 keys or rotate the CH control to select the new 

Encryption key.

• There are 16 available Encryption keys (1 ~ 16).

‡ (DFKJURXSPHPEHUPXVWVHOHFWDFRGHWKDWLVLQHDFKPHPEHU·VNH\OLVWLQRUGHUIRU

the transceivers to descramble the received signals.

3 Press the PF 1, PF 2, or PF 3 key to exit Key Selection mode.

Note:  To return the transceiver to the default programmed Encryption key, select “PRESET”.  
However, if you delete the Encryption key {page 26}, it will not be recovered.