JVC KENWOOD Corporation 39923220 ユーザーズマニュアル

14

1 Select the desired zone and channel using the GRP

 and 

 keys and the 

CH control.

 :KHQ\RXKHDUDFDOOHU·VYRLFHUHDGMXVWWKHYROXPHDVQHFHVVDU\

• If the vibrator function is on, the transceiver will vibrate when a call is received.

• If signaling has been programmed on the selected channel, you will hear a call only 

if the signal tone matches the tone set up on your transceiver.

Note:  Signaling allows your transceiver to code your calls.  This will prevent you from listening 
to unwanted calls.  It does not make calls private, it only prevents them from being heard by 
transceivers set with a different signaling code.  Refer to “SIGNALING” on page 27 for details. 

Q  R

When you receive a group call on a Conventional channel and the received 
JURXS,'PDWFKHVWKH,'VHWXSRQ\RXUWUDQVFHLYHU\RXFDQKHDUWKHFDOOHU·V
voice.

When you receive a group call on a Trunking channel, the transceiver 
DXWRPDWLFDOO\VZLWFKHVWRWKHWUDIÀFFKDQQHOWRUHFHLYHWKHFDOO

• Readjust the volume as necessary.

Q  R

When you receive an individual call on a Conventional channel, a ringing tone 
ZLOOVRXQGDQGWKHGLVSOD\ZLOOVKRZWKHFDOOHU·V,'7RUHVSRQGWRWKHFDOO
press and hold the microphone PTT switch and speak into the transceiver as 
you would during a normal transmission.

When you receive an individual call on a Trunking channel, a ringing tone will 
ZRXQGDQGWKHGLVSOD\ZLOODOWHUQDWHEHWZHHQWKHFDOOHU·V,'DQG´5(&(,9,1*µ
To receive the call, press the PTT switch.  To deny the call, press and hold the 
PF 1 key or the keypad # key.  After receiving the call, you can respond to the 
call by pressing and holding the PTT switch and speaking into the microphone 
DV\RXZRXOGGXULQJDQRUPDOWUDQVPLVVLRQ$IWHUWKHFDOOLVÀQLVKHGSUHVVWKH
PF 1 key or the keypad # key to end the call.