JVC KENWOOD Corporation 39923220 ユーザーズマニュアル

22

Note:  DTMF calls can be made only in Conventional FM Operation.

Q  M

Note:  To make a DTMF call using manual dialing, you must use an optional microphone with a 
DTMF keypad.

1 Press and hold the microphone PTT switch.

2 Enter the desired digits using the DTMF keypad.

• If you release the PTT switch, transmit mode will end even if the complete 

number has not been sent.

Q K

If your dealer has activated the Keypad Auto PTT function, simply press the 
keys on the keypad to make the call.

• The DTMF code will be sent automatically when you press a key.

Q S

1 Enter the desired digits using the DTMF keypad.

• The digits appear on the display as you enter them.

• You can enter up to 31 digits before transmitting.

2 After entering the complete number, press the microphone PTT switch to 

transmit.

Note:  If you switch the power OFF before transmitting the number, the number will be cleared.

Autodial allows you to quickly call DTMF numbers that have been programmed 
onto your transceiver.

1 Press the key programmed as Autodial.

‡ ´&2'("µRUWKHÀUVWHQWU\LQWKH$XWRGLDOOLVWDSSHDUVRQWKHGLVSOD\

2 Press the GRP

 and 

 keys, rotate the CH control, or enter the 

appropriate DTMF number (01 ~ 32) to select your desired Autodial list 
number.

3 Press the microphone PTT switch or the PF 4 key to make the call.

This function is used when a transceiver is stolen or lost.  When the transceiver 
receives a call containing a stun code, either transmit mode will be disabled, 
or both receive mode and transmit mode will be disabled.  The stun code is 
cancelled when the transceiver receives a call with a revive code.