JVC KENWOOD Corporation 408000 ユーザーズマニュアル
20
■
Selecting an Offset Frequency
To access a repeater which requires an odd-split frequency pair,
change the offset frequency from the default which is used by
most repeaters.
1 Enter Menu mode and access Menu No. 2 (OFFSET).
2 Press [MENU] and rotate the Selector (or press [UP]/
1 Enter Menu mode and access Menu No. 2 (OFFSET).
2 Press [MENU] and rotate the Selector (or press [UP]/
[DOWN]) to select the appropriate offset frequency value.
• The selectable range is from 00.000 MHz to 29.950 MHz,
• The selectable range is from 00.000 MHz to 29.950 MHz,
in steps of 50 kHz.
Note: After changing the offset frequency, the new offset
frequency will also be used by Automatic Repeater Offset.
A
ctiVAting
the
t
one
F
unction
Press
[F], [1] to turn the Tone function ON.
• Continually press
[F], [1] to toggle the functions as follows: Tone
ON >> CTCSS ON >> DCS ON >> OFF.
• The “ ” icon appears when the Tone function is ON.
S
electing
A
t
one
F
requency
To select the tone frequency required to access your desired
repeater:
1 Press [F], [2].
1 Press [F], [2].
• The current tone frequency appears on the display. The
default frequency is 88.5 Hz.