JVC KENWOOD Corporation 412900 ユーザーズマニュアル
INSTAllINg ThE BATTERY PAcK
Note: Because the battery pack is provided uncharged, you must charge the battery pack before
using it with the transceiver. To charge the battery pack, refer to “CHARGING THE PB-45L
BATTERY PACK ” {page 4}.
1 Unlock (open) the safety catch located at the bottom of the battery pack.
2 Match the guides of the battery pack with the corresponding grooves on the
2 Match the guides of the battery pack with the corresponding grooves on the
upper rear of the transceiver, then firmly press the battery case to lock it in
place.
3 Flip the safety catch into place to prevent accidentally pressing the release
latch and removing the battery pack.
4 To remove the battery pack, lift the safety catch, then press the release latch to
unlock the battery pack. Lift the battery pack away from the transceiver.
INSTAllINg AlKAlINE BATTERIES
1 To open the optional BT-5 battery case lid, insert your thumb or finger into
the hole on the top of the battery case, then pull the cover up.
2 Insert (or remove) six AAA (LR) Alkaline batteries.
• Be sure to match the battery polarities with those marked in the bottom of
the battery case.