JVC KENWOOD Corporation 431200 ユーザーズマニュアル

7

Select the desired zone and channel/group ID using the keys programmed as [Zone Up]/ 
[Zone Down] and [CH/GID Up]/ [CH/GID Down].

•  You can program names for zones and channels/group IDs with up to 10 characters.

1  Select the desired zone and channel/group ID.

2  Press the key programmed as [Monitor] or [Squelch Off] to check whether or not the 

channel is free.
•  If the channel is busy, wait until it becomes free.

3 Press 

the 

PTT switch and speak into the microphone.  Release the PTT switch to 

receive.
•  For best sound quality, hold the transceiver approximately 1.5 inches (3 ~ 4 cm) 

from your mouth.

■  Making Group Calls (Digital) 

 

If a key has been programmed as [Group], you can select a group ID from the list to 
make a call to those parties on a Conventional channel. 

 

To select a group ID:

1  Press the key programmed as [Group].

2 Press 

the  /  key to select a group ID/name from the list.

3  Press and hold the PTT switch to make the call.

•  Speak into the transceiver as you would during a normal transmission.

■  Making Individual Calls (Digital) (Types I and II Only)

 

If a key has been programmed with [Individual], you can make calls to specific 
persons.

1  Press the key programmed as [Individual].

2 Press 

the  /  key to select a unit ID from the list.

•  On Type I models, you can enter a unit ID directly.

3  Press and hold the PTT switch to make the call.

•  Speak into the transceiver as you would during a normal transmission.