JVC KENWOOD Corporation 458300 ユーザーズマニュアル

ii

Observe the following precautions to prevent fi re, personal injury, and transceiver 
damage.

•  Do not attempt to confi gure the transceiver while driving; it is too dangerous.

•  Do not disassemble or modify the transceiver for any reason.

•  Do not expose the transceiver to long periods of direct sunlight, nor place it near heating 

appliances.

•  If an abnormal odor or smoke is detected coming from the transceiver, switch the 

transceiver power off immediately, and contact your KENWOOD dealer.

•  Use of the transceiver while you are driving may be against traffi c laws.  Please check 

and observe the vehicle regulations in your area.

•  Do not use options not specifi ed by KENWOOD.

◆  The transceiver operates in 12 V negative ground systems only!  Check the battery polarity and 

voltage of the vehicle before installing the transceiver.

◆  Use only the supplied DC power cable or a KENWOOD optional DC power cable.
◆  Do not cut and/or remove the fuse holder on the DC power cable.

  For passenger safety, install the transceiver securely using the supplied mounting bracket and 

screw set so the transceiver will not break loose in the event of a collision.