JVC KENWOOD Corporation 471200 ユーザーズマニュアル
4
PRECAUTIONS
Observe the following precautions to prevent fire, personal injury, and transceiver
damage.
damage.
•
Do not attempt to configure the transceiver while driving; it is too dangerous.
•
Do not disassemble or modify the transceiver for any reason.
•
Do not expose the transceiver to long periods of direct sunlight, nor place it near heating
appliances.
appliances.
•
If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver
power off immediately, and contact your KENWOOD dealer.
power off immediately, and contact your KENWOOD dealer.
•
Use of the transceiver while you are driving may be against traffic laws. Please check and
observe the vehicle regulations in your area.
observe the vehicle regulations in your area.
•
Do not use options not specified by KENWOOD.
•
Do not put the plastic bag used for packing of this equipment on the place which reaches a small
child's hand. It will become a cause of suffocation if it wears flatly.
child's hand. It will become a cause of suffocation if it wears flatly.
•
Do not place the transceiver on unstable surfaces.
•
Keep the volume as low as possible to protect your hearing.
•
Always switch the transceiver power off before installing optional accessories.
•
To dispose of batteries, be sure to comply with the laws and regulations in your country or region.
◆ The transceiver operates in 12 V negative ground systems only! Check the battery polarity and
voltage of the vehicle before installing the transceiver.
◆ Use only the supplied DC power cable or a KENWOOD optional DC power cable.
◆ Do not cut and/or remove the fuse holder on the DC power cable.
◆ Do not place the microphone cable around your neck while near machinery that may catch the
cable.
◆ For passenger safety, install the transceiver securely using the supplied mounting bracket and
screw set so the transceiver will not break loose in the event of a collision.