JVC KENWOOD Corporation 475701 ユーザーズマニュアル

11

Press [ ] to switch the transceiver ON.
Press [ ] again to switch the transceiver OFF.

Press the key programmed as [Volume Up] to increase the volume.  Press the 
key programmed as [Volume Down] to decrease the volume.

Select the desired zone and channel using the keys programmed as [Zone Up]/ 
[Zone Down] and [Channel Up]/ [Channel Down].

•   “G1” (Zone 1)/ “16” (Channel 16) appears on the display.

1  Select the desired zone and channel.
2  Press the key programmed as [Monitor] or [Squelch Off] to check whether or 

not the channel is free.

•  If the channel is busy, wait until it becomes free.
•  For best sound quality at the receiving station, hold the microphone approximately 

1.5 inches (3 cm to 4 cm) from your mouth.

Select the desired zone and channel.  If signaling has been programmed on the 
selected channel, you will hear a call only if the received signal matches your 
transceiver settings.

When you receive a group call and the received group ID matches the ID set up 
on your transceiver, you can hear the caller’s voice.

When you receive an individual call, a ringing tone will sound and the caller’s ID 
will appear on the display. To respond to the call, press and hold the PTT switch 
and speak into the transceiver as you would during a normal transmission.