JVC KENWOOD Corporation 479100 ユーザーズマニュアル
15
instaLLinG/ reMovinG aLKaLine Batteries
(oPtionaL Battery Case)
◆
Do not install batteries in a hazardous environment where
sparks could cause an explosion.
◆
Never discard batteries in fire; extremely high temperatures can
cause batteries to explode.
◆
Do not short circuit the battery case terminals.
◆
Do not use rechargeable batteries.
note:
◆
◆
If you do not plan to use the transceiver for a long period,
remove the batteries from the battery case.
◆
This battery case has been designed for transmitting at a
power of approximately 1 W (the low power setting on your
transceiver). If you want to transmit a stronger signal (using
the high power setting on your transceiver), use an optional
rechargeable battery pack.
1 To open the battery case, press
on the two tabs on the upper
rear of the case, then pull the
two halves apart.
2 Insert 6 AA (LR6) Alkaline
batteries into the battery case.
• Be sure to match the polarities
with those marked in the
bottom of the battery case.
3 Align the tabs of the cover with
the base, then push down on
the cover until it locks in place.