JVC KENWOOD Corporation 479100 ユーザーズマニュアル
25
BasiC oPerations
sWitChinG PoWer on/ oFF
Turn the
Power switch/ Volume control clockwise to switch the
transceiver power ON.
Turn the
Turn the
Power switch/ Volume control counter-clockwise to
switch the transceiver power OFF.
aDJUstinG the voLUMe
rotate the
Power switch/ Volume control to adjust the volume.
seLeCtinG a Zone anD ChanneL
1 Select the desired zone using the Selector or 4-way D-pad
or the buttons programmed as
[Zone up]/ [Zone Down].
Each zone contains a group of channels.
2 Select the desired channel using the Selector or 4-way
D-pad or the buttons programmed as [Channel up]/
[Channel Down]. Each channel is programmed with
settings for transmitting and receiving.
• The default setting for the
Selector is [Channel Select].
• The transceivers may have names programmed for zones and
channels. The zone name and channel name can contain up to
12 and 14 characters respectively. While selecting a zone, the
zone name will appear above the channel name.
• If programmed by your dealer, your transceiver will announce the
zone and channel numbers as you change them.