Wi Lan Inc EB04 ユーザーズマニュアル
Configuration
116
AWE 120-58 User Guide
Assigning Community Names
Community names can be used to control SNMP access to the AWE. Community Name 1 has read only
access, and Community Name 2 has both read and write access. An SNMP manager can access and configure
any AWE unit on the network as long as the unit has the correct community names and remote access is
enabled (see
access, and Community Name 2 has both read and write access. An SNMP manager can access and configure
any AWE unit on the network as long as the unit has the correct community names and remote access is
enabled (see
➧
To assign community names
1.
From the Main Menu, select System Security and press
Enter
. The System Security menu is
displayed.
2.
Select SNMP Community Name 1.
3.
Type in name. (Valid community names are assigned using SNMP software.)
4.
Press
Enter
. The new name appears in the entry field.
5.
Select SNMP Community Name 2.
6.
Type in name. (Valid community names are assigned using SNMP software.)
7.
Press
Enter
. The new name appears in the entry field.
8.
Press
Esc
to exit to the Main Menu.
! CAUTION
Default community names are presented in all Installation and Configuration guides
distributed by Wi-LAN. It is the responsibility of the customer to ensure that default
community names are changed to unique names at installation. Record all community
name changes
Community name
Privileges
Default value
SNMP Community Name 1
Read
public
SNMP Community Name 2
Read and Write
netman
H - Help System Security
SNMP Community Name 1 -> public
SNMP Community Name 2 netman
Change User Password Press Enter to change password
Confirm User Password Press Enter to confirm password
Change Supervisor Password Press Enter to change password
Confirm Supervisor Password Press Enter to confirm password
Ethernet Access to Local Host on
Wireless Access to Local Host on
Auto Logout Minutes (1-120) 10