Matric Limited CB500 ユーザーズマニュアル
Technical Manual
Wireless CAN Bridge 500 (CB-500)
Matric Technical Manual 185-XXXX, V1
Page 1 of 11
Description:
The Wireless CAN Bridge functions as a wireless link that transfers CAN messages.
Using the Wireless CAN Bridge, nodes on either side of a wireless link can
communicate at a typical separation of 500 feet. A full 64 node DeviceNet* can be
implemented depending on scan rates and frame density. Since actual CAN messages
are transferred, the Wireless CAN Bridge supports any type of CAN bus standard
including CAN Open and CAN Kingdom.
The Wireless CAN Bridge functions as a wireless link that transfers CAN messages.
Using the Wireless CAN Bridge, nodes on either side of a wireless link can
communicate at a typical separation of 500 feet. A full 64 node DeviceNet* can be
implemented depending on scan rates and frame density. Since actual CAN messages
are transferred, the Wireless CAN Bridge supports any type of CAN bus standard
including CAN Open and CAN Kingdom.
CAN
BRIDGE
SCANNER
NODE
MOTOR
CONTROL
NODE
SENSOR
NODE
Virtual
Trunk
Line
Terminator
Tap
Trunk Line
Trunk Line
(extended by CAN Bridge)
(extended by CAN Bridge)
I/O BLOCK
NODE
CAN
BRIDGE