Yaesu Musen Co. Ltd. 20693X20 ユーザーズマニュアル

1.   Turn the antenna clockwise until it is secured.

 

z

Do not hold or twist the upper part of the 

antenna when installing or removing it. To 

do so may break the conductors inside the 

antenna.

 

z

Do not key the transmit without installing the 

antenna. The transmitter components may 

be damaged.

 

z

When using an antenna other than the 

one supplied, or connecting to an external 

antenna, ensure that the SWR is adjusted to 

1.5 or lower.

Hold the thick base

of the antenna

1.  Attach the belt clip on the back of transceiver 

using the supplied screws (two).

 

z

Be sure to use the supplied screws when 

attaching the belt clip. If any other screws 

are used, the belt clip cannot be secured 

firmly to the battery pack and the transceiver 

may drop off together with the battery pack; 

the transceiver and battery pack may fall off, 

causing injury, breakage and other damage.

 

z

Use a hand strap which can withstand the 

weight of the transceiver. If the hand strap is 

not strong enough, the it may break and the 

transceiver may fall, causing injury, breakage 

and other difficulty.

Supplied Screws

Strap Hole for commercially

available strap

Belt Clip

1.  ①Referring to the figure at the right, insert 

the battery pack into the seals of the battery 

compartment on the back of the transceiver.

2.   ②Push the battery pack in until the battery latch 

clicks securely.

1.  Turn the transceiver OFF. While sliding the latch 

in the direction of the arrow, as shown in the 

illustration, slide the battery pack downward and 

out of the transceiver.