Yaesu Musen Co. Ltd. 30053X30 ユーザーズマニュアル
GX1256S
Page 53
[CALL/SET] Key
The [CALL/SET] key functions as the enter key.
Secondary use
Press the [CALL/SET] key to access the DSC OPERATION menu.
Press and hold the [CALL/SET] key to access the SETUP menu.
The [CALL/SET] key functions as the enter key.
Secondary use
Press the [CALL/SET] key to access the DSC OPERATION menu.
Press and hold the [CALL/SET] key to access the SETUP menu.
[DW] Key
Watches for a transmission on CH16 and another selected channel until
either signal is received. (Dual watch)
NOTE: When the DSC SCANNING feature is enabled (see section 7.15
DSC SCAN), the radio watches for a transmission on CH16, another
selected channel, and CH70 until either signal is received (Triple watch).
Secondary use
Press and hold [DW] key, intercom operation will operate between radio
and RAM Mic.
Watches for a transmission on CH16 and another selected channel until
either signal is received. (Dual watch)
NOTE: When the DSC SCANNING feature is enabled (see section 7.15
DSC SCAN), the radio watches for a transmission on CH16, another
selected channel, and CH70 until either signal is received (Triple watch).
Secondary use
Press and hold [DW] key, intercom operation will operate between radio
and RAM Mic.
[NAV] Key
Press and hold this key, when connected to the GPS receiver, the LCD
displays Position Data from the GPS.
Press and hold this key, when connected to the GPS receiver, the LCD
displays Position Data from the GPS.
[WX] Key
Immediately recalls the previously selected NOAA weather channel from
any channel location.
Secondary use
Holding down the [16/9] key while pressing the [WX] key changes the
mode from USA to International or Canadian.
NOTE: If position is displayed, this icon will be hidden.
Immediately recalls the previously selected NOAA weather channel from
any channel location.
Secondary use
Holding down the [16/9] key while pressing the [WX] key changes the
mode from USA to International or Canadian.
NOTE: If position is displayed, this icon will be hidden.
[DISTRESS] KEY
Used to send a DSC Distress Call. To send the distress call:
1. Lift the red rubber cover.
2. Press and hold the Red button. The RAM+ display will
Used to send a DSC Distress Call. To send the distress call:
1. Lift the red rubber cover.
2. Press and hold the Red button. The RAM+ display will
count down (3-2-1) and then transmit the Distress call.
3. When the distress signal is sent, Ch70 and “TX” icon
will appear on the LCD. After the message has been
sent, the radio will sound a Distress Alarm.
sent, the radio will sound a Distress Alarm.
4. The transceiver “shadow-watches” for a transmission
on CH16 or CH70 until an acknowledgment signal is
received. “DISTRESS” and “WAITING” will appear on
the LCD.
received. “DISTRESS” and “WAITING” will appear on
the LCD.