Yaesu Musen Co. Ltd. 30493X20 ユーザーズマニュアル
Page 3
HX300
Q
uick
R
efeRence
G
uide
This transceiver is equipped with the E2O (Easy-To-Operate) system. You
can do the basic operation in numerical order of the illustration below.
Connect the supplied CAT460 antenna securely.
Press and hold the
key to turn on or off the radio.
Press the key several times until the “
VOL” indicator blinks, then
press the
/
key to adjust the speaker audio volume.
Press the
/
key to selects the operating channel.
Press the key several times until the “
SQL” indicator blinks, then
press the
key to squelch or press the
key to un-squelch the ra-
dio.
Press the
key to toggle the transmit power between High (5W) and
Low (1W).
Press the key briefly to recall channel 16.
Press and hold the key for two seconds to recall channel 9.
Press the key again to revert to the last selected channel.
Place your mouth about 1 inch (2.5 cm) away from MIC hole and speak
in a normal voice level while pressing the
PTT switch.
MIC Hole
FCC ID: K6630493X20 / IC: 511B-303493X20
Vertex Standard Co.,Ltd.